D(T)Z Single/Three Phase Secondary Commute Spot-Protruding Welding
machine is a newly developed machine that works directly on object
with DC. This DC power is received from secondary winding of large
Power Si-diode of welding transformer. The current is changed from
AC to DC to weld the parts. 1.The secondary of transformer is a direct current return routine,
so the transformer has very small inductance, compared with the
similar family of spot welding machines, its power factor is much
higher . 2.Direct current heating can avoid energy loss caused by the
decreasing of AC amplitude, and also prevent sparking as of over
current at peak value. Compared with other similar products, it
requires less rated capacity and also high welding quality when
welding the same thickness materials. 3.No alternation electromagnetic force between the two polar arwis
can ensure steady polar arwis can ensure steady polar pressure. 4.Balance three-phrase has no effect on electric net. Hence the
energy saving substantially 5.Besides welding general materials. It’s suitable for welding
multi-layers steel sheet. Over 4mm+4mm aluminum product. And
aluminum alloy. Achieving good welding result. Product Mode | Rated Capabilitycapacity(KVA) | Rated primary voltage | Rated duty cycle | Secondary Voltage of Transformer | Distance between the Polar Arms | Traveling distance of Polar Arm | Rated Polar Pressure | Welding Capability | Low carbon stee | Aluminum | DZ-83 | 63 | 380 | 50 | 7.31 | 500 | 25 | 12.06 | 4.0+4.0 | 1.0+1.0 | DZ-100 | 100 | 380 | 50 | 8.26 | 500 | 25 | 12.06 | 5.0+5.0 | 1.5+1.5 | DZ-125 | 125 | 380 | 50 | 9.05 | 500 | 25 | 12.06 | 5.0+5.0 | 2.0+2.0 | DZ-150 | 150 | 380 | 50 | 12.75 | 500 | 25 | 18.84 | 6.0+6.0 | 3.0+3.0 | Tz-3×63 | 3×63 | 380 | 50 | 7.31 | 500 | 25 | 18.84 | 7.0+7.0 | 3.0+3.0 | Tz-3×100 | 3×100 | 380 | 50 | 8.26 | 600 | 25 | 18.84 | 8.0+8.0 | 3.5+3.5 | Tz-3×125 | 3×125 | 380 | 50 | 9.05 | 600 | 25 | 18.84 | | 4.0+4.0 | Tz-3×150 | 3×150 | 380 | 50 | 12.75 | 600 | 25 | 22.80 | | 5.0+5.0 |
| 
